In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques that you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the house, you need to get them some special dog protection.
Paper Plate 3d Dog Mask https://drankenhandelhoefnagels.be/?p=76072 DIY Materials: This is the initial part of the setup which will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so you get something which looks like a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you are done, so you don’t wind up with smudges or smears on your dog.
Then it is time to paste the mask onto your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Be sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the face of your dog. Do not make the folds too big or else it might look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain that the ears are flat and make certain it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask as your pet security, you’ll have to do some sanding to be certain it is safe on your dog. You can accomplish it by sanding off any excess paper which might have been eliminated from your mask.